Shop
4 POST CAR LIFT | 9,000LB | QL4P9K
$4,299.99 USDEnjoy the benefits of HD steel runways and full diamond-plated aluminum ramps. The lightweight aluminum ramp construction replaces heavy steel, making your lifting experience smoother and more efficient.
Cradle Pads
$228.00 USDTechnical Specification
Peg50 – Set of 4, compatible with Stratus Lift SAE-C9P, SAE-F10S, SAE-F10P, SAE-F10X, SAE-C10P, SAE-C10X, SAE-C10XE
Peg55 – Set of 4
HD TWO POST LIFT | BASE PLATE | 12,000LB | SKU: QL12KB
$4,899.00 USDElevate your garage experience with our flagship automotive lift – the 12,000lb Base Plate Two Post Lift. Quick Lift USA presents the ultimate solution for both passionate home garage enthusiasts and seasoned professionals. With its robust 220V motor and heavy-duty design, this lift is engineered to redefine your workspace and enhance your automotive projects.
KT-4H110 Four Post Vehicle Lift 11,000lbs
$4,590.00 USDLift 15,000lbs. Rolling Jack Included
- 15000lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Single Point Manual Safety Lock Release
- Four mechanical locking devices, each equipped with both primary and secondary safety locks.
- Powerside column can be installed at both sides, front or rear.
- Non-skid diamond platforms and adjustable safety lock ladders.
- One 6000lbs rolling jack is included
- Comes with turn tables for wheel alignment
- High-quality hydraulic system, 3KW motor with 220V/60HZ/1PH or 110V/60HZ/1PH (Optional)
KT-4H850 8,500Lbs Heavy Duty 4-Post Car lift
$3,498.00 USD- 8500lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Single Point Manual Safety Lock Release
- Four mechanical locking devices, each equipped with both primary and secondary safety locks.
- Powerside column can be installed at both sides, front or rear.
- Non-skid diamond platforms and adjustable safety lock ladders.
- Comes with a caster kit for moving the lift around
- Comes with two drip trays and a jack tray
- High-quality hydraulic system with 110V/60HZ/1PH or 220V/60HZ/1PH (Optional)
KT-AS110D Two Post Asymmetrical
$3,099.00 USDTwo Post Asymmetrical Vehicle Lift 11,000lbs Single Point Lock Release
- 11000lbs (4990KG) lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Single Point Lock Release
- Asymmetric arms
- Direct Drive Cylinders
- Rubber pad door opening protection
- Comes with adjustable extended support adaptor sets that range from 3.94 inches to 6 inches.
- Overhead safety shutoff bar
- Feet-protection safety guardrails with toolbox
- High-quality hydraulic system with 220V/60HZ/1PH or 110V/ 60HZ/ 1PH (Optional)
KT-B700 Wheel Balancer
$1,059.00 USDKT-B700 Wheel Balancer:
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No preset parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable.
- Optional wheel guard
- Longer shaft also compatible with wider wheels
KT-B750 Wheel Balancer
$1,499.00 USD-Automatic measurement ruler for auto input A and D values.
-The body use 3mm thickness steel, high strength, solid welding, few vibration.
-All-in-one pressure sensor support design, bottom board thickness 8mm,side board thickness 8mm, that insure the sensor working stable and high precision.
-Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life.
-The φ36mm shaft thread is by quenching treatment, high strength.
-Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life.
-The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life.
-Various balance mode, according different rim for different balance mode, make the balance effect more precision.
-Built-in fault diagnosis and self calibration program that double side calibration ,No memory parameters, operation more easy.
-Unit selection(Ounce/Gram, MM/Inch).
-High quality integration power board, working stable and reliable.
-Composite slash guard included.
-Longer shaft for more width wheels
KT-B760 Wheel Balancer
$1,199.00 USD- Automatic measurement ruler for auto input A and D values
- The body uses 3mm-thick steel with high strength, solid welding and low vibration
- All-in-one pressure sensor support design, both bottom and side boards are 8mm thick, and it insures that the sensor work stably with high precision
- Top level motor and pure copper winding provides more power, faster heat dissipation, lower defect rate and longer using life
- The 36mm shaft thread is made by quenching treatment to offer high strength
- The computer board adopts advanced welding technology to make it moisture proof, dust proof and antistatic
- Various balance mode for different types of rims to provide more precision
- Built-in fault diagnosis and self-calibration program with double side calibration. No pre-set parameters so the users can operate with ease
- Unit selection (Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Optional wheel guard
- Longer shaft, also compatible with wider wheels
KT-B790 Heavy Duty Truck Tire Wheel Balancer
$2,390.00 USD- User-friendly and well-lit display monitor enables work even in very bright places.
- Cone sets for car and light truck tires
- Cone and spacer set for truck, bus, or implement tires
- Heavy-duty steel wing nut
- 220 Volt (single phase) Motor
- Protective hood to ensure the safety of operation
- Designed specifically for balancing heavy truck wheels (up to 440 lbs).
KT-H100 Two Post Vehicle Lift 10,000lbs
$2,699.00 USD- 10000lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.
- Manual safety release from two sides
- Symmetric arm
- Base plate design
- Dual Hydraulic Chain-Drive Cylinders
- Rubber pad door opening protection
- Comes with extension support adaptor sets of +30mm and +120mm
- Feet-protection safety guardrails with tools box
- Top-level hydraulic system with 220V/60HZ/1PH and 110V/60HZ/1PH (Optional)